Skip to content

ceu-arduino/driver-hcsr04

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

12 Commits
 
 
 
 
 
 

Repository files navigation

HC-SR04 - Ultrasonic Sensor

Ultrasonic ranging sensor:

https://www.sparkfun.com/products/13959

API

Macros

These macros must be defined before including the driver:

#define HCSR04_ECHO     <fill-with-input-pin>
#define HCSR04_TRIGGER  <fill-with-output-pin>

NOTE: The current driver only supports a single device.

Includes

#include "hcsr04.ceu"

Code Abstractions

HCSR04_Read

Measures the distance from an obstacle:

code/await HCSR04_Read (var int?, var int?) -> int?;

Parameters:

  • int: energy port used to turn on and off the sensor
  • int: wake up time. Time, in ms, the driver waits for the circuit to stabilize

Return:

  • int?: the distance found (if any)

The measures takes at most 25ms. If passing a energy port as first parameter, the measure takes at most 25 + 80, where 80 is the default wake up time.

The recommended period between measures is 60ms.

HCSR04_Init

Turns on the Ultrasonic Sensor

code/await HCSR04_Init (var int energyPort, var int? time) -> NEVER;

Parameters:

  • int: energy port used to turn on and off the sensor
  • int: wake up time. Time, in ms, the driver waits for the circuit to stabilize

Return:

  • NEVER: never returns

Examples

Periodic measures

Measures the distance continuously with a period of at least 60ms:

#include "out.ceu"
#include "int0.ceu"
#include "wclock.ceu"

output high/low OUT_07;
output high/low OUT_13;

#define HCSR04_ECHO    INT0
#define HCSR04_TRIGGER OUT_07
#include "hcsr04.ceu"

loop do
    var int? d = await HCSR04_Read(_,_);
    emit OUT_13(d? and ((d! <= 30) as high/low));
    await 60ms;     // minimum recommended time between measures
end

Single measure (turning the Ultrasonic Sensor on and off)

With Ultrasonic Sensor VCC connect to pin 8 of Arduino UNO

#include "out.ceu"
#include "int0.ceu"

output high/low OUT_07;
output high/low OUT_13;

#define HCSR04_ECHO    INT0
#define HCSR04_TRIGGER OUT_07
#include "hcsr04.ceu"

var int? d = await HCSR04_Read(8,_);
emit OUT_13(d? and ((d! <= 30) as high/low));

await FOREVER;

Periodic measures (turning the Ultrasonic Sensor on)

#include "out.ceu"
#include "int0.ceu"
#include "wclock.ceu"

output high/low OUT_07;
output high/low OUT_13;

#define HCSR04_ECHO    INT0
#define HCSR04_TRIGGER OUT_07
#include "hcsr04.ceu"

spawn HCSR04_Init(8,_);

loop do
    var int? d = await HCSR04_Read(_,_);
    emit OUT_13(d? and ((d! <= 30) as high/low));
    await 60ms;     // minimum recommended time between measures
end

About

Driver - HC-SR04 - Ultrasonic Sensor

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published