Skip to content

Kafka sink connector for Amazon EventBridge to send events (records) from Kafka topic(s) to the specified EventBridge event bus

License

Notifications You must be signed in to change notification settings

awslabs/eventbridge-kafka-connector

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Kafka Connector for Amazon EventBridge

Build Java E2E Latest Release

This Kafka sink connector for Amazon EventBridge allows you to send events (records) from one or multiple Kafka topic(s) to the specified event bus, including useful features such as:

  • offloading large events to S3 (✨ new in v1.3.0)
  • configurable topic to event detail-type name mapping with option to provide a custom class to customize event detail-type naming (✨ new in v1.3.0)
  • custom IAM profiles per connector
  • IAM role-based authentication
  • provide custom credentials provider class (✨ new in v1.3.3)
  • support for dead-letter queues
  • and schema registry support for Avro and Protocol Buffers (Protobuf).

See configuration below for details.

Amazon EventBridge Event Bus is a serverless event router that enables you to create scalable event-driven applications by routing events between your own applications, third-party SaaS applications, and other AWS services. You can set up routing rules to determine where to send your events, allowing for application architectures to react to changes in your systems as they occur. To get started with Amazon EventBridge, visit our documentation.

The connector is released as a community-supported open-source project with best effort support from the repository maintainers.

Installation

Confluent Connector Hub

Download the connector from Confluent Connector Hub.

Java Archive (JAR)

Two kafka-eventbridge-sink JAR files, are created on each release. The JAR file *-with-dependencies.jar contains all required dependencies of the connector, excluding Kafka Connect dependencies and (de)serializers, such as connect-api and connect-json. To support additional (de)serializers, such as Avro and Protobuf using the AWS Glue Schema Registry, install these dependencies in your Kafka Connect environment before deploying this connector.

From Source

The following steps describe how to clone the repo and perform a clean packaging of the connector. Requires Maven and Java Development Kit (JDK 11 or later).

Clone the repo:

git clone https://github.com/awslabs/eventbridge-kafka-connector.git
cd eventbridge-kafka-connector

Create JAR artifacts:

mvn clean package -Drevision=$(git describe --tags --always)

From Source (Docker)

The following steps describe how to clone the repo and perform a clean packaging of the connector using Docker.

Clone the repo:

# clone repo
git clone https://github.com/awslabs/eventbridge-kafka-connector.git
cd eventbridge-kafka-connector

Create JAR artifacts:

docker run --rm -v $(pwd):/src -w /src -it maven:3-eclipse-temurin-11 \
mvn clean package -Drevision=$(git describe --tags --always)

Tip

If you want to reuse your local Maven cache and/or persist the Maven dependencies pulled, add
-v <local_maven_folder>:/root/.m2 to the above command.

Configuration

In addition to the common Kafka Connect sink-related configuration options, this connector defines the following configuration properties.

Property Required Default Description
aws.eventbridge.connector.id Yes The unique ID of this connector (used in the EventBridge event source field as a suffix on kafka-connect. to uniquely identify a connector).
aws.eventbridge.region Yes The AWS region of the target event bus.
aws.eventbridge.eventbus.arn Yes The ARN of the target event bus.
aws.eventbridge.endpoint.uri No An optional service endpoint URI used to connect to EventBridge.
aws.eventbridge.eventbus.global.endpoint.id No An optional global endpoint ID of the target event bus specified using abcde.xyz syntax (see API documentation).
aws.eventbridge.eventbus.resources No Optional Resources (comma-seperated) to add to each EventBridge event.
aws.eventbridge.detail.types No "kafka-connect-${topic}" The detail-type that will be used for the EventBridge events. Can be defined per topic e.g., "topic1:MyDetailType, topic2:MyDetailType", as a single expression with a dynamic ${topic} placeholder for all topics e.g., "my-detail-type-${topic}" or as a static value without additional topic information for all topics e.g, "my-detail-type".
aws.eventbridge.detail.types.mapper.class No An optional class name implementing software.amazon.event.kafkaconnector.mapping.DetailTypeMapper to customize the EventBridge detail-type field mapping. If specified, the configuration property aws.eventbridge.detail.types is ignored.
aws.eventbridge.time.mapper.class No An optional class name implementing software.amazon.event.kafkaconnector.mapping.TimeMapper to customize the EventBridge Time field mapping. If not specified, the event Time is set by EventBridge.
aws.eventbridge.retries.max No 2 The maximum number of retry attempts when sending events to EventBridge.
aws.eventbridge.retries.delay No 200 The retry delay in milliseconds between each retry attempt.
aws.eventbridge.auth.credentials_provider.class No software.amazon.awssdk.auth.credentials.DefaultCredentialsProvider or software.amazon.awssdk.services.sts.auth.StsAssumeRoleCredentialsProvider if aws.eventbridge.iam.role.arn is provided An optional class name of the credentials provider to use. It must implement software.amazon.awssdk.auth.credentials.AwsCredentialsProvider with a no-arg constructor and optionally org.apache.kafka.common.Configurable to configure the provider after instantiation.
aws.eventbridge.iam.profile.name No Use the specified IAM profile to resolve credentials See Using different Configuration Profiles per Connector for details
aws.eventbridge.iam.role.arn No Uses STS to assume the specified IAM role with periodic refresh. The connector ID is used as the session name.
aws.eventbridge.iam.external.id No The IAM external id (optional) when role-based authentication is used.
aws.eventbridge.offloading.default.s3.bucket No The S3 bucket to use to offload events to S3 (see Offloading large events (payloads) to S3)
aws.eventbridge.offloading.default.fieldref No $.detail.value The part of the event (payload) to offload to S3 (only active when aws.eventbridge.offloading.default.s3.bucket is set)

Note

When using the default retry configuration (or retries > 0), the connector provides at-least-once delivery semantics for valid Kafka records, i.e., records which can be correctly (de)serialized before making a delivery attempt to EventBridge.

Examples

JSON Encoding

The following minimal configuration configures the connector with default values, consuming Kafka records from the topic "json-values-topic" with record keys as String and JSON values (without schema), and sending events to the custom EventBridge event bus "kafkabus" in region "us-east-1".

{
    "name": "EventBridgeSink-Json",
    "config": {
        // consume from earliest record or last checkpointed offset if available
        "auto.offset.reset": "earliest",
        "connector.class": "software.amazon.event.kafkaconnector.EventBridgeSinkConnector",
        "topics": "json-values-topic",
        "aws.eventbridge.connector.id": "my-json-values-connector",
        "aws.eventbridge.eventbus.arn": "arn:aws:events:us-east-1:1234567890:event-bus/kafkabus",
        "aws.eventbridge.region": "us-east-1",
        "key.converter": "org.apache.kafka.connect.storage.StringConverter",
        // see note below on JSON schemas
        "value.converter": "org.apache.kafka.connect.json.JsonConverter",
        "value.converter.schemas.enable": false
    }
}

Note

Currently, when using JsonConverter for keys or values, the connector uses a fixed configuration schemas.enable=false, i.e., JSON schemas are not included in the outgoing EventBridge event.

JSON Encoding with Dead-Letter Queue

Continuing the example above, the following configuration defines a dead-letter queue (DLQ), i.e., topic, "json-dlq" which will be created with an replication factor of 1 if it does not exist. Records which cannot be converted or delivered to EventBridge will be sent to this DLQ.

{
    "name": "EventBridgeSink-Json",
    "config": {
        "auto.offset.reset": "earliest",
        "connector.class": "software.amazon.event.kafkaconnector.EventBridgeSinkConnector",
        "topics": "json-values-topic",
        "aws.eventbridge.connector.id": "my-json-values-connector",
        "aws.eventbridge.eventbus.arn": "arn:aws:events:us-east-1:1234567890:event-bus/kafkabus",
        "aws.eventbridge.region": "us-east-1",
        "key.converter": "org.apache.kafka.connect.storage.StringConverter",
        "value.converter": "org.apache.kafka.connect.json.JsonConverter",
        "value.converter.schemas.enable": false,
        "errors.tolerance":"all",
        "errors.deadletterqueue.topic.name":"json-dlq",
        "errors.deadletterqueue.topic.replication.factor":1
    }
}

Avro Encoding with multiple Topics, IAM Role and custom Retries

The following configuration shows some advanced options, such as multiple topics with customized detail-type mapping, customized retry behavior, and IAM-based authentication, and how to deserialize Avro-encoded record values (with JSON-encoded keys) using AWS Glue Schema Registry (GSR).

{
  "name": "EventBridgeSink-Avro",
  "config": {
    "auto.offset.reset": "earliest",
    "connector.class": "software.amazon.event.kafkaconnector.EventBridgeSinkConnector",
    "topics": "avro-topic-1,avro-topic-2",
    "aws.eventbridge.connector.id": "avro-test-connector",
    "aws.eventbridge.eventbus.arn": "arn:aws:events:us-east-1:1234567890:event-bus/kafkabus",
    "aws.eventbridge.region": "us-east-1",
    // customized retries
    "aws.eventbridge.retries.max": 1,
    "aws.eventbridge.retries.delay": 1000,
    // custom detail-type mapping with topic suffix
    "aws.eventbridge.detail.types": "avro-test-${topic}",
    // IAM-based authentication
    "aws.eventbridge.iam.role.arn":"arn:aws:iam::1234567890:role/EventBridgePutEventsRole",
    "tasks.max": 1,
    "schema.history.internal.kafka.bootstrap.servers": "kafka:9092",
    "schema.history.internal.kafka.topic": "schema-changes.inventory",
    "key.converter": "org.apache.kafka.connect.json.JsonConverter",
    // dependencies (Classes) must be in the connector $CLASSPATH
    "value.converter": "com.amazonaws.services.schemaregistry.kafkaconnect.AWSKafkaAvroConverter",
    // GSR region
    "value.converter.region": "us-east-1",
    // GSR registry to use (expects schemas to exist and IAM role to have permission to read)
    "value.converter.registry.name": "avro-kafka-eventbridge",
    "value.converter.avroRecordType": "GENERIC_RECORD"
  }
}

Important

This connector does not include custom (de)serializers, such as AWSKafkaAvroConverter as shown above. Refer to the Kafka Connect, schema registry (e.g. GSR), or (de)serializer (e.g. GSR SerDes) documentation how to provide them to Kafka connectors.

Topic to detail-type Mapping

The main task of this connector is to convert Kafka records to EventBridge events. Since this connector can be used to consume from multiple Kafka topics, which an EventBridge user might want to filter later on, the mapping of topic names to the EventBridge detail-type, i.e. event type, is customizable.

The default, i.e., when the configuration option aws.eventbridge.detail.types is not set, uses kafka-connect- as a prefix, followed by the topic name of each individual record. Alternatively, a custom detail-type can be defined per topic, provided as a comma-separated list with the syntax "<topic_name>:<detail_type>,<topic_name>:<detail_type>,..." e.g., "orders:com.example.org.orders.event.v0,customers:com.example.org.customers.event.v0". Records from the orders topic would result in EventBridge events with a detail-type: com.example.org.orders.event.v0.

If only the topic name should be used, a single expression with a dynamic ${topic} placeholder for all topics can be used e.g., "my-detail-type-${topic}" (using a hardcoded prefix), "${topic}" (only topic name), or as a static value without additional topic information "my-detail-type".

Tip

You can implement custom detail-type mapping by specifying a custom class in the aws.eventbridge.detail.types.mapper.class configuration property.

Offloading large events (payloads) to S3

The current PutEvents size limit in EventBridge is 256KB. This can be problematic in cases where Kafka topics contain records exceeding this limit. By default, the connector logs a warning when trying to send those events to EventBridge which can be ignored (dropped) or sent to a Kafka dead-letter topic (see Payloads exceeding PutEvents Limit).

Alternatively, the connector can be configured to offload (parts of) the event to S3 before calling the PutEvents API. This is also known as the claim-check pattern. When enabled (see Configuration), every record received from the associated Kafka topics in the connector which matches the JSONPath expression defined in aws.eventbridge.offloading.default.fieldref(default: $.detail.value) will be offloaded.

Configure Offloading

To enable offloading, specify an S3 bucket via aws.eventbridge.offloading.default.s3.bucket.

Note

The IAM credentials/role used in the connector needs PutObject permissions.

Unless overwritten by aws.eventbridge.offloading.default.fieldref, the connector will offload the value in $.detail.value to S3, delete that key from the event and add claim-check information to the event metadata (see examples below). The JSONPath expression applies to the converted EventBridge event before calling PutEvents to EventBridge.

The benefits of this approach over other offloading implementations is flexibility in which parts of the events should be offloaded and retaining as much of the original event as possible to harness the powerful event filtering capabilities in EventBridge. For example, some events in a topic might contain large blobs of binary/base64-encoded data which most consumers are not interested. In those cases, offloading helps to trim down event (payload) size and giving the consumer(s) interested in the full payload the option to fully reconstruct the event based on the offloaded S3 object and metadata added to the event structure.

Note

Array and wildcard references are not allowed in the JSONPath expression defined in aws.eventbridge.offloading.default.fieldref and the JSONPath must always begin with $.detail.value.

Examples

Assuming offloading is enabled via the setting aws.eventbridge.offloading.default.s3.bucket="my-offloading-bucket" and the following event structure which the S3 offloading logic in the connector operates on before making the final PutEvents API call to EventBridge:

{
    "version": "0",
    "id": "dbc1c73a-c51d-0c0e-ca61-ab9278974c57",
    "account": "1234567890",
    "time": "2023-05-23T11:38:46Z",
    "region": "us-east-1",
    "detail-type": "kafka-connect-json-values-topic",
    "source": "kafka-connect.my-json-values-connector",
    "resources": [],
    "detail": {
        "topic": "json-values-topic",
        "partition": 0,
        "offset": 0,
        "timestamp": 1684841916831,
        "timestampType": "CreateTime",
        "headers": [],
        "key": "order-1",
        "value": {
            "orderItems": [
                "item-1",
                "item-2"
            ],
            "orderCreatedTime": "Tue May 23 13:38:46 CEST 2023",
            "orderPreferences": null
        }
    }
}

If aws.eventbridge.offloading.default.fieldref is $.detail.value (the default), the resulting event sent to EventBridge would be:

{
    "version": "0",
    "id": "dbc1c73a-c51d-0c0e-ca61-ab9278974c57",
    "account": "1234567890",
    "time": "2023-05-23T11:38:46Z",
    "region": "us-east-1",
    "detail-type": "kafka-connect-json-values-topic",
    "source": "kafka-connect.my-json-values-connector",
    "resources": [],
    "detail": {
        "topic": "json-values-topic",
        "partition": 0,
        "offset": 0,
        "timestamp": 1684841916831,
        "timestampType": "CreateTime",
        "headers": [],
        "key": "order-1",
        "dataref": "arn:aws:s3:::my-offloading-bucket/2d10c6f6-31e9-43b4-8706-51b4cf5534d8",
        "datarefJsonPath": "$.detail.value"
    }
}

In the S3 bucket my-offloading-bucket there would be an object 2d10c6f6-31e9-43b4-8706-51b4cf5534d8 containing:

{
  "orderItems": [
      "item-1",
      "item-2"
  ],
  "orderCreatedTime": "Tue May 23 13:38:46 CEST 2023",
  "orderPreferences": null
}

Continuing the example, if aws.eventbridge.offloading.default.fieldref is $.detail.value.non-existing-key, offloading would pass this event through without modification. The resulting event would be the same as the input event without offloading information:

{
    "version": "0",
    "id": "dbc1c73a-c51d-0c0e-ca61-ab9278974c57",
    "account": "1234567890",
    "time": "2023-05-23T11:38:46Z",
    "region": "us-east-1",
    "detail-type": "kafka-connect-json-values-topic",
    "source": "kafka-connect.my-json-values-connector",
    "resources": [],
    "detail": {
        "topic": "json-values-topic",
        "partition": 0,
        "offset": 0,
        "timestamp": 1684841916831,
        "timestampType": "CreateTime",
        "headers": [],
        "key": "order-1",
        "value": {
            "orderItems": [
                "item-1",
                "item-2"
            ],
            "orderCreatedTime": "Tue May 23 13:38:46 CEST 2023",
            "orderPreferences": null
        }
    }
}

If aws.eventbridge.offloading.default.fieldref is $.detail.value.orderPreferences and matches a key with a null value, offloading is also skipped as there is nothing to offload. The resulting event would be the same as the input event without offloading information:

{
    "version": "0",
    "id": "dbc1c73a-c51d-0c0e-ca61-ab9278974c57",
    "account": "1234567890",
    "time": "2023-05-23T11:38:46Z",
    "region": "us-east-1",
    "detail-type": "kafka-connect-json-values-topic",
    "source": "kafka-connect.my-json-values-connector",
    "resources": [],
    "detail": {
        "topic": "json-values-topic",
        "partition": 0,
        "offset": 0,
        "timestamp": 1684841916831,
        "timestampType": "CreateTime",
        "headers": [],
        "key": "order-1",
        "value": {
            "orderItems": [
                "item-1",
                "item-2"
            ],
            "orderCreatedTime": "Tue May 23 13:38:46 CEST 2023",
            "orderPreferences": null
        }
    }
}

Note

If offloading matches a key with an empty object {} or array [], these values are considered a match and will be offloaded just as any other matched value.

Retry Behavior

By default, the connector is configured to retry failed PutEvents API calls, i.e. an Exception was thrown, 2 times, i.e., 3 total attempts, with a constant delay between each retry of 200 milliseconds. These values can be configured (see configuration). The following exceptions (incl. their subclasses) are considered retryable: AwsServiceException, SdkClientException, ExecutionException, InterruptedException, TimeoutException.

Note

EventBridgeExceptions with a 413 status code (PutEventsRequestEntry limit exceeded) are not retried.

Note

The setting aws.eventbridge.retries.max is also used on the underlying AWS SDK client, which automatically handles certain retryable errors, such as throttling, without immediately throwing an exception. Currently, this can lead to more than the desired retry attempts since those exceptions are also considered retryable by the connector code.

Authentication and Permissions

Authentication (IAM Credentials)

Each connector task creates an EventBridge client using the AWS DefaultCredentialsProvider to look up credentials. AWS credential providers use a predefined configuration and configuration order to retrieve credentials from the various credential sources.

For example, you can provide (temporary) credentials to the connector using AWS_ACCESS_KEY_ID, AWS_SECRET_ACCESS_KEY, and AWS_SESSION_TOKEN environment variables. For information how to use AWS config and credentials profiles to resolve credentials, see Using different Configuration Profiles per Connector.

When the configuration property “aws.eventbridge.iam.role.arn” is set, the StsAssumeRoleCredentialsProvider is directly used to assume the specified IAM role and periodically refresh credentials with STS. The STS client uses the configured region of the connector for the STS client and retrieves credentials using the DefaultCredentialsProvider retrieval chain described above.

Required Connector Permissions to send events to EventBridge (IAM Policy)

The connector only requires events:PutEvents permission as shown in the IAM policy example below. For details refer to the "Managing access permissions to your Amazon EventBridge resources" documentation.

{
    "Version": "2012-10-17",
    "Statement": [
        {
            "Sid": "AllowPutEventsKafkaConnector",
            "Effect": "Allow",
            "Action": "events:PutEvents",
            "Resource": "<ARN of your event bus>"
        }
    ]
}

Important

If you use the Glue Schema Registry, the IAM role needs additional permissions to retrieve schemas e.g., using the managed policy AWSGlueSchemaRegistryReadonlyAccess. Please refer to the Glue Schema Registry documentation.

Using different Configuration Profiles per Connector

If you run multiple EventBridge connectors in your Kafka Connect environment, using environment variables or Java system properties to configure your connectors means that each connector will be configured with the same IAM permissions. If you want to configure multiple connectors with specific (different) IAM profiles from your config and credentials files, the connector configuration option aws.eventbridge.iam.profile.name can be used.

With the connector configuration option aws.eventbridge.iam.profile.name you specify which profile the specific connector will use.

Important

Environment variables, such as AWS_PROFILE or AWS access keys always take precedence over the configuration files and must not be set for this configuration option to take effect.

Steps to configure a connector with a configuration profile:

First, set "aws.eventbridge.iam.profile.name": "my-custom-profile" in the connector JSON configuration file (replace example values with your desired profile name). Then, create (or mount) the AWS config and credentials files in your Kafka Connect host(s). If the configuration files are not located/mounted in the default location, set the environment variables AWS_CONFIG_FILE and AWS_SHARED_CREDENTIALS_FILE accordingly. For example, with Docker you can mount them from your local machine using Docker volume mounts and environment variables (see example below).

Docker Compose Example for a custom profile "my-custom-profile"

config file:

[profile my-custom-profile]
output=text # not used by the SDK, for illustration purposes

credentials file:

[my-custom-profile]
aws_access_key_id=AKIAIOSFODNN7EXAMPLE
aws_secret_access_key=wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY
aws_session_token = IQoJb3JpZ2luX2IQoJb3JpZ2luX2IQoJb3JpZ2luX2IQoJb3JpZ2luX2IQoJb3JpZVERYLONGSTRINGEXAMPLE

Docker Compose file (snippet):

  connect:
    # (snip)
    environment:
      AWS_CONFIG_FILE: '/aws/config'
      AWS_SHARED_CREDENTIALS_FILE: '/aws/credentials'
    volumes:
      - /Users/example/.aws:/aws # mount credentials from local host to /aws folder

You can also use role-based authentication with this approach by referencing a source_profile in the config file:

config file (role-based authentication):

[profile my-custom-profile]
role_arn = arn:aws:iam::0123456789:role/KafkaConnectorPutEvents
source_profile = default # assume role using credentials using from the default profile specified in the credentials file

Custom credentials provider

To use your own credentials provider, the class must implement the interface of AwsCredentialsProvider with a no-arg constructor and optionally the Kafka Configurable interface to configure the provider after instantiation.

Example configuration to use custom credentials provider com.example.MyCustomCredentialsProvider:

{
    "name": "EventBridgeSink-CustomCredentialsProvider",
    "config": {
        // other configuration attributes are omitted for clarity
        "aws.eventbridge.auth.credentials_provider.class": "com.example.MyCustomCredentialsProvider"
    }
}

Important

Since the class must be loadable from Kafka Connect, place the (uber) JAR with your custom credentials provider (and third-party dependencies) to a directory already listed in the plugin path (plugin.path).

Deployment to Kafka Connect

The connector can be deployed like any Kafka connector e.g., using the Kafka Connect REST API:

curl -i -X POST -H "Accept:application/json" -H  "Content-Type:application/json" http://<kafka-connect-api>:<kafka-connect-port>/connectors/ -d @connector_config.json

Important

On Amazon Managed Streaming for Apache Kafka (MSK), follow the official documentation how to create a custom plugin (connector).

Example Event

Below is an example of an event received by an EventBridge target using the minimal JSON configuration described above.

{
    // fields set by EventBridge
    "version": "0",
    "id": "dbc1c73a-c51d-0c0e-ca61-ab9278974c57",
    "account": "1234567890",
    "time": "2023-05-23T11:38:46Z",
    "region": "us-east-1",
    // customizable fields (see configuration)
    // detail-type is highly configurable (see section below)
    "detail-type": "kafka-connect-json-values-topic",
    // source is kafka-connect.<connector-id>
    "source": "kafka-connect.my-json-values-connector",
    "resources": [],
    // contains Kafka record key/value and metadata
    "detail": {
        "topic": "json-values-topic",
        "partition": 0,
        "offset": 0,
        "timestamp": 1684841916831,
        "timestampType": "CreateTime",
        "headers": [],
        "key": "order-1",
        "value": {
            "orderItems": [
                "item-1",
                "item-2"
            ],
            "orderCreatedTime": "Tue May 23 13:38:46 CEST 2023"
        }
    }
}

Example EventBridge Rule Pattern

The following Rule pattern would match the above event, i.e., any event where:

  • source is exactly kafka-connect.my-json-values-connector and
  • detail.key starts with order and
  • the field orderItems exists in the details.value object
{
  "source": ["kafka-connect.my-json-values-connector"],
  "detail": {
    "key": [{"prefix": "order"}],
    "value": {
      "orderItems": [{"exists": true}]
    }
  }
}

Tip

Consult the EventBridge event patterns documentation for a complete explanation of available patterns.

Troubleshooting

Common issues are around schema handling, authentication and authorization (IAM), and debugging the event flow.

Schemas

If you see the following errors, check your connector configuration if it uses the correct key and value schema settings.

Error:

The following error is caused when the JsonConverter is used and configured to use a schema within the Kafka record. If the Kafka record was not produced with a JSON schema, i.e., only the JSON value, deserialization will fail with:

org.apache.kafka.connect.errors.DataException: JsonConverter with schemas.enable requires "schema" and "payload" 
fields and may not contain additional fields. If you are trying to deserialize plain JSON data, 
set schemas.enable=false in your converter configuration.

Resolution:

"value.converter": "org.apache.kafka.connect.json.JsonConverter",
"value.converter.schemas.enable": "false",

Error:

The following error is caused when an AvroConverter is used but the respective key/value is not Avro-encoded:

org.apache.kafka.common.errors.SerializationException: Error deserializing Avro message for id -1
org.apache.kafka.common.errors.SerializationException: Unknown magic byte!

Resolution:

Change the key and/or value converters from Avro to the actual schema/payload type stored in the topic.

IAM

When invalid IAM credentials are used, such as due to expired tokens or insufficient permissions, the connector will throw an exception after an PutEvents API call attempt to EventBridge or during key/value deserialization when an external schema registry with authentication is used. An example error message due to insufficient PutEvents permissions looks like:

org.apache.kafka.connect.errors.ConnectException: software.amazon.event.kafkaconnector.exceptions.EventBridgeWriterException: 
java.util.concurrent.ExecutionException: software.amazon.awssdk.services.eventbridge.model.EventBridgeException: 
User: arn:aws:sts::1234567890:assumed-role/some/role is not authorized to perform: events:PutEvents on resource: arn:aws:events:us-east-1:1234567890:event-bus/kafkabus because no identity-based policy allows the events:PutEvents action 
(Service: EventBridge, Status Code: 400, Request ID: e5ed0fb7-535d-4417-b38b-110f8495d0cb)

Throttling (API Rate Limiting)

By default, the underlying AWS SDK client used will automatically handle throttle errors (exceptions) when the PutEvents ingestion quota for the account/region is exceeded. However, depending on your quota and ingestion rate, if the client keeps hitting the rate limit it might throw an exception to the connector. When setting aws.eventbridge.retries.max greater than 0, the connector will attempt to retry such a failed PutEvents attempt up to aws.eventbridge.retries.max. If aws.eventbridge.retries.max is 0 or the retry budget is exhausted, a terminal ConnectException is thrown and the task will be stopped.

We recommend to verify your PutEvents account quota for the specific AWS region and adjusting the Kafka Connect sink setting consumer.override.max.poll.records accordingly. For example, if your PutEvents quota is 500, setting consumer.override.max.poll.records=400 leaves enough headroom.

Note

The EventBridge PutEvents quota is an account-level soft quota, i.e., it applies to the sum of all PutEvents requests in the same account, such as running multiple tasks of this connector. If you need to increase the quota beyond the hard limit, reach out to the EventBridge service team to better understand your use case and needs.

Note

consumer.override.max.poll.interval.ms is a related setting after which a consumer is considered failed and will leave the consumer group. Continuing the example above, if consumer.override.max.poll.records=400 and consumer.override.max.poll.interval.ms=300000 (the default as of Kafka 3.5), it means that processing 400 records is allowed to take up to 5 minutes, i.e., 750 milliseconds per record/event, before considering the consumer (task) failed.

Payloads exceeding PutEvents Limit

EventBridge has a limit of 256KB on the request size used in PutEvents. When a Kafka record exceeds this threshold, the connector will log a warning and ignore (skip) over the record. Optionally, a dead-letter topic can be configured where such records are sent to or offloading to S3 can be enabled.

[2023-05-26 09:01:21,149] WARN [EventBridgeSink-Json|task-0] [@69c7029] Marking record as failed: code=413 message=EventBridge batch size limit exceeded topic=json-test partition=0 offset=0 (software.amazon.event.kafkaconnector.EventBridgeWriter:244)
[2023-05-26 09:01:21,149] WARN [EventBridgeSink-Json|task-0] [@69c7029] Dead-letter queue not configured: skipping failed record (software.amazon.event.kafkaconnector.EventBridgeSinkTask:147)
software.amazon.event.kafkaconnector.exceptions.EventBridgePartialFailureResponse: statusCode=413 errorMessage=EventBridge batch size limit exceeded topic=json-test partition=0 offset=0

Debugging Event Flow (TRACE-level logging)

The connector will periodically (asynchronously) on a per-task basis report the count of successful PutEvents API calls e.g.:

[2023-05-25 11:53:04,598] INFO [EventBridgeSink-Json|task-0] Total records sent=15 (software.amazon.event.kafkaconnector.util.StatusReporter:36)

Tip

Depending on your Kafka Connect environment, you can enable [EventBridgeSink-Json|task-0] logging style using this environment variable in Kafka Connect CONNECT_LOG4J_APPENDER_STDOUT_LAYOUT_CONVERSIONPATTERN: "[%d] %p %X{connector.context}%m (%c:%L)%n"

By enabling TRACE-level logging, the connector will emit additional log messages, such as the underlying AWS SDK client configuration, records received from Kafka Connect, PutEvents stats, such as start, end time and duration, etc.

[2023-05-25 12:01:56,882] TRACE [EventBridgeSink-Json|task-0] [@69c7029] EventBridgeSinkTask put called with 1 records: [SinkRecord{kafkaOffset=0, timestampType=CreateTime} ConnectRecord{topic='json-test', kafkaPartition=0, key=my-key, keySchema=Schema{STRING}, value={sentTime=Thu May 25 14:01:56 CEST 2023}, valueSchema=null, timestamp=1685016116860, headers=ConnectHeaders(headers=)}] (software.amazon.event.kafkaconnector.EventBridgeSinkTask:57)
[2023-05-25 12:01:56,889] TRACE [EventBridgeSink-Json|task-0] [@69c7029] EventBridgeSinkTask putItems call started: start=2023-05-25T12:01:56.889640Z attempts=1 maxRetries=0 (software.amazon.event.kafkaconnector.EventBridgeSinkTask:77)
[2023-05-25 12:01:56,909] TRACE [EventBridgeSink-Json|task-0] [@69c7029] EventBridgeWriter sending request to eventbridge: PutEventsRequest(Entries=[PutEventsRequestEntry(Source=kafka-connect.json-test-connector, Resources=[], DetailType=kafka-connect-json-test, Detail={"topic":"json-test","partition":0,"offset":0,"timestamp":1685016116860,"timestampType":"CreateTime","headers":[],"key":"my-key","value":{"sentTime":"Thu May 25 14:01:56 CEST 2023"}}, EventBusName=arn:aws:events:us-east-1:1234567890:event-bus/kafkabus)]) (software.amazon.event.kafkaconnector.EventBridgeWriter:140)
[2023-05-25 12:01:57,242] TRACE [EventBridgeSink-Json|task-0] [@69c7029] EventBridgeWriter putEvents response: [PutEventsResultEntry(EventId=875b7f21-f098-8b55-ea7a-a4d235079bfb)] (software.amazon.event.kafkaconnector.EventBridgeWriter:142)
[2023-05-25 12:01:57,242] TRACE [EventBridgeSink-Json|task-0] [@69c7029] EventBridgeSinkTask putItems call completed: start=2023-05-25T12:01:56.889640Z completion=2023-05-25T12:01:57.242428Z durationMillis=352 attempts=1 maxRetries=0 (software.amazon.event.kafkaconnector.EventBridgeSinkTask:99)

Depending on your Kafka Connect environment, you can enable TRACE-level logging via environment variables on Kafka Connect using CONNECT_LOG4J_LOGGERS: "software.amazon.event.kafkaconnector=TRACE". Please consult your Kafka Connect documentation how to configure and change log levels for a particular connector.

Warning
Enabling TRACE-level logging can expose sensitive information due to logging record keys and values. It is strongly recommended to audit changes to the log level to guard against leaking sensitive data, such as personally identifiable information (PII).

Contributing and Security

See CONTRIBUTING for more information.

License

This project is licensed under the Apache-2.0 License.

Credits

A HUGE THANK YOU to @flo-mair and @maschnetwork for their initial contributions to this project.