Merge branch 'bugfix-2.1.x' of https://github.com/MarlinFirmware/Marlin…

… into bugfix-2.1.x-Feb

.github/ISSUE_TEMPLATE/config.yml

@@ -7,7 +7,7 @@ contact_links:
     url: https://www.facebook.com/groups/1049718498464482
     about: Please ask and answer questions here.
   - name: 🕹 Marlin on Discord
-    url: https://discord.gg/n5NJ59y
+    url: https://discord.com/servers/marlin-firmware-461605380783472640
     about: Join the Discord server for support and discussion.
   - name: 🔗 Marlin Discussion Forum
     url: https://reprap.org/forum/list.php?415

.github/contributing.md

@@ -43,7 +43,7 @@ We have a Message Board and a Facebook group where our knowledgable user communi
 
 If chat is more your speed, you can join the MarlinFirmware Discord server:
 
-* Use the link https://discord.gg/n5NJ59y to join up as a General User.
+* Use the link https://discord.com/servers/marlin-firmware-461605380783472640 to join up as a General User.
 * Even though our Discord is pretty active, it may take a while for community members to respond — please be patient!
 * Use the `#general` channel for general questions or discussion about Marlin.
 * Other channels exist for certain topics or are limited to Patrons. Check the channel list.

.github/workflows/auto-label.yml

@@ -14,7 +14,7 @@ jobs:
   autolabel:
     name: Auto Label
     if: github.repository == 'MarlinFirmware/Marlin'
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     steps:
     - name: Auto Label for [BUG]
       uses: actions/github-script@v7

.github/workflows/bump-date.yml

@@ -14,7 +14,7 @@ jobs:
     name: Bump Distribution Date
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
 
     steps:
 

.github/workflows/check-pr.yml

@@ -18,7 +18,7 @@ jobs:
     name: PR Bad Target
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
 
     steps:
     - uses: superbrothers/close-pull-request@v3

.github/workflows/ci-build-tests.yml

@@ -34,7 +34,7 @@ jobs:
     name: Build Test
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
 
     strategy:
       fail-fast: true

.github/workflows/ci-unit-tests.yml

@@ -36,7 +36,7 @@ jobs:
     # pulls them into additional branches.
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
 
     steps:
     - name: Check out the PR

.github/workflows/ci-validate-boards.yml

@@ -0,0 +1,48 @@
+#
+# ci-validate-boards.yml
+# Validate boards.h to make sure it's all set up correctly
+#
+
+name: CI - Validate boards.h
+
+# We can do the on: section as two items, one for pull requests and one for pushes...
+on:
+  pull_request:
+    branches:
+    - bugfix-2.1.x
+    paths:
+    - 'Marlin/src/core/boards.h'
+  push:
+    branches:
+    - bugfix-2.1.x
+    paths:
+    - 'Marlin/src/core/boards.h'
+
+jobs:
+  validate_pins_files:
+    name: Validate boards.h
+    if: github.repository == 'MarlinFirmware/Marlin'
+
+    runs-on: ubuntu-22.04
+
+    steps:
+    - name: Check out the PR
+      uses: actions/checkout@v4
+
+    - name: Cache pip
+      uses: actions/cache@v4
+      with:
+        path: ~/.cache/pip
+        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
+        restore-keys: |
+          ${{ runner.os }}-pip-
+
+    - name: Select Python 3.9
+      uses: actions/setup-python@v5
+      with:
+        python-version: '3.9'
+        architecture: 'x64'
+
+    - name: Validate core/boards.h
+      run: |
+        make validate-boards -j

.github/workflows/ci-validate-pins.yml

@@ -26,7 +26,7 @@ jobs:
     name: Validate Pins Files
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
 
     steps:
     - name: Check out the PR

.github/workflows/clean-closed.yml

@@ -13,7 +13,7 @@ on:
 
 jobs:
   remove_label:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
 
     strategy:
       matrix:

.github/workflows/close-stale.yml

@@ -14,7 +14,7 @@ jobs:
     name: Close Stale Issues
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
 
     steps:
     - uses: actions/stale@v9

.github/workflows/lock-closed.yml

@@ -14,7 +14,7 @@ jobs:
     name: Lock Closed Issues
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
 
     steps:
     - uses: dessant/lock-threads@v5

.github/workflows/unlock-reopened.yml

@@ -14,7 +14,7 @@ jobs:
     name: Unlock Reopened
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
 
     steps:
     - uses: OSDKDev/unlock-issues@v1.1

.gitignore

@@ -125,6 +125,7 @@ vc-fileutils.settings
 # Visual Studio Code
 .vscode/*
 !.vscode/extensions.json
+*.code-workspace
 
 # Simulation files
 imgui.ini

.zed/settings.json

@@ -0,0 +1,16 @@
+/**
+ * Marlin-specific settings for Zed
+ *
+ * For a full list of overridable settings, and general information on folder-specific settings,
+ * see the documentation: https://zed.dev/docs/configuring-zed#settings-files
+ */
+{
+  "languages": {
+    "C": {
+      "enable_language_server": false
+    },
+    "C++": {
+      "enable_language_server": false
+    }
+  }
+}

Makefile

@@ -6,9 +6,10 @@ UNIT_TEST_CONFIG ?= default
 
 help:
 	@echo "Tasks for local development:"
-	@echo "make marlin                    : Build marlin for the configured board"
+	@echo "make marlin                    : Build Marlin for the configured board"
 	@echo "make format-pins -j            : Reformat all pins files (-j for parallel execution)"
 	@echo "make validate-pins -j          : Validate all pins files, fails if any require reformatting"
+	@echo "make validate-boards -j        : Validate boards.h and pins.h for standards compliance"
 	@echo "make tests-single-ci           : Run a single test from inside the CI"
 	@echo "make tests-single-local        : Run a single test locally"
 	@echo "make tests-single-local-docker : Run a single test locally, using docker"
@@ -102,3 +103,11 @@ format-pins: $(PINS)
 validate-pins: format-pins
 	@echo "Validating pins files"
 	@git diff --exit-code || (git status && echo "\nError: Pins files are not formatted correctly. Run \"make format-pins\" to fix.\n" && exit 1)
+
+BOARDS_FILE := Marlin/src/core/boards.h
+
+.PHONY: validate-boards
+
+validate-boards:
+	@echo "Validating boards.h file"
+	@python $(SCRIPTS_DIR)/validate_boards.py $(BOARDS_FILE) || (echo "\nError: boards.h file is not valid. Please check and correct it.\n" && exit 1)

Marlin/Configuration.h

@@ -61,7 +61,7 @@
 // @section info
 
 // Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
+#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Original author or contributor.
 //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
 
 // @section machine
@@ -106,7 +106,7 @@
 
 /**
  * Select a third serial port on the board to use for communication with the host.
- * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1
+ * Currently supported for AVR, DUE, SAMD51, LPC1768/9, STM32/STM32F1/HC32, and Teensy 4.x
  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9]
  */
 //#define SERIAL_PORT_3 1
@@ -385,14 +385,15 @@
  *   PRUSA_MMU1           : Průša MMU1 (The "multiplexer" version)
  *   PRUSA_MMU2           : Průša MMU2
  *   PRUSA_MMU2S          : Průša MMU2S (Requires MK3S extruder with motion sensor, EXTRUDERS = 5)
+ *   PRUSA_MMU3           : Průša MMU3  (Requires MK3S extruder with motion sensor and MMU firmware version 3.x.x, EXTRUDERS = 5)
  *   EXTENDABLE_EMU_MMU2  : MMU with configurable number of filaments (ERCF, SMuFF or similar with Průša MMU2 compatible firmware)
  *   EXTENDABLE_EMU_MMU2S : MMUS with configurable number of filaments (ERCF, SMuFF or similar with Průša MMU2 compatible firmware)
  *
  * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails.
  * See additional options in Configuration_adv.h.
- * :["PRUSA_MMU1", "PRUSA_MMU2", "PRUSA_MMU2S", "EXTENDABLE_EMU_MMU2", "EXTENDABLE_EMU_MMU2S"]
+ * :["PRUSA_MMU1", "PRUSA_MMU2", "PRUSA_MMU2S", "PRUSA_MMU3", "EXTENDABLE_EMU_MMU2", "EXTENDABLE_EMU_MMU2S"]
  */
-//#define MMU_MODEL PRUSA_MMU2
+//#define MMU_MODEL PRUSA_MMU3
 
 // @section psu control
 
@@ -713,10 +714,13 @@
  * Use a physical model of the hotend to control temperature. When configured correctly this gives
  * better responsiveness and stability than PID and removes the need for PID_EXTRUSION_SCALING
  * and PID_FAN_SCALING. Enable MPC_AUTOTUNE and use M306 T to autotune the model.
- * @section mpctemp
+ * @section mpc temp
  */
 #if ENABLED(MPCTEMP)
   #define MPC_AUTOTUNE                                // Include a method to do MPC auto-tuning (~6.3K bytes of flash)
+  #if ENABLED(MPC_AUTOTUNE)
+    //#define MPC_AUTOTUNE_DEBUG                      // Enable MPC debug logging (~870 bytes of flash)
+  #endif
   //#define MPC_EDIT_MENU                             // Add MPC editing to the "Advanced Settings" menu. (~1.3K bytes of flash)
   //#define MPC_AUTOTUNE_MENU                         // Add MPC auto-tuning to the "Advanced Settings" menu. (~350 bytes of flash)
 
@@ -798,6 +802,40 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+/**
+ * Peltier Bed - Heating and Cooling
+ *
+ * A Peltier device transfers heat from one side to the other in proportion to the amount of
+ * current flowing through the device and the direction of current flow. So the same device
+ * can both heat and cool.
+ *
+ * When "cooling" in addition to rejecting the heat transferred from the hot side to the cold
+ * side, the dissipated power (voltage * current) must also be rejected. Be sure to set up a
+ * fan that can be powered in sync with the Peltier unit.
+ *
+ * This feature is only set up to run in bang-bang mode because Peltiers don't handle PWM
+ * well without filter circuitry.
+ *
+ * Since existing 3D printers are made to handle relatively high current for the heated bed,
+ * we can use the heated bed power pins to control the Peltier power using the same G-codes
+ * as the heated bed (M140, M190, etc.).
+ *
+ * A second GPIO pin is required to control current direction.
+ * Two configurations are possible: Relay and H-Bridge
+ *
+ * (At this time only relay is supported. H-bridge requires 4 MOS switches configured in H-Bridge.)
+ *
+ * Power is handled by the bang-bang control loop: 0 or 255.
+ * Cooling applications are more common than heating, so the pin states are commonly:
+ *   LOW  = Heating = Relay Energized
+ *   HIGH = Cooling = Relay in "Normal" state
+ */
+//#define PELTIER_BED
+#if ENABLED(PELTIER_BED)
+  #define PELTIER_DIR_PIN           -1  // Relay control pin for Peltier
+  #define PELTIER_DIR_HEAT_STATE   LOW  // The relay pin state that causes the Peltier to heat
+#endif
+
 // Add 'M190 R T' for more gradual M190 R bed cooling.
 //#define BED_ANNEALING_GCODE
 
@@ -838,14 +876,16 @@
   // Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
   // and placed inside the small Creality printer enclosure tent.
   //
-  #define DEFAULT_chamberKp 37.04
-  #define DEFAULT_chamberKi 1.40
+  #define DEFAULT_chamberKp  37.04
+  #define DEFAULT_chamberKi   1.40
   #define DEFAULT_chamberKd 655.17
   // M309 P37.04 I1.04 D655.17
 
   // FIND YOUR OWN: "M303 E-2 C8 S50" to run autotune on the chamber at 50 degreesC for 8 cycles.
 #endif // PIDTEMPCHAMBER
 
+// @section pid temp
+
 #if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
   //#define PID_OPENLOOP          // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
   //#define SLOW_PWM_HEATERS      // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
@@ -1464,7 +1504,8 @@
  * A lightweight, solenoid-driven probe.
  * For information about this sensor https://github.com/bigtreetech/MicroProbe
  *
- * Also requires: PROBE_ENABLE_DISABLE
+ * Also requires PROBE_ENABLE_DISABLE
+ * With FT_MOTION requires ENDSTOP_INTERRUPTS_FEATURE
  */
 //#define BIQU_MICROPROBE_V1  // Triggers HIGH
 //#define BIQU_MICROPROBE_V2  // Triggers LOW
@@ -1603,7 +1644,8 @@
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
-// X and Y axis travel speed (mm/min) between probes
+// X and Y axis travel speed (mm/min) between probes.
+// Leave undefined to use the average of the current XY homing feedrate.
 #define XY_PROBE_FEEDRATE (133*60)
 
 // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
@@ -1634,6 +1676,7 @@
   #define PROBE_TARE_DELAY 200    // (ms) Delay after tare before
   #define PROBE_TARE_STATE HIGH   // State to write pin for tare
   //#define PROBE_TARE_PIN PA5    // Override default pin
+  //#define PROBE_TARE_MENU       // Display a menu item to tare the probe
   #if ENABLED(PROBE_ACTIVATION_SWITCH)
     //#define PROBE_TARE_ONLY_WHILE_INACTIVE  // Fail to tare/probe if PROBE_ACTIVATION_SWITCH is active
   #endif
@@ -1671,8 +1714,8 @@
  * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD.
  * Only integer values >= 1 are valid here.
  *
- * Example: `M851 Z-5` with a CLEARANCE of 4  =>  9mm from bed to nozzle.
- *     But: `M851 Z+1` with a CLEARANCE of 2  =>  2mm from bed to nozzle.
+ * Example: 'M851 Z-5' with a CLEARANCE of 4  =>  9mm from bed to nozzle.
+ *     But: 'M851 Z+1' with a CLEARANCE of 2  =>  2mm from bed to nozzle.
  */
 #define Z_CLEARANCE_DEPLOY_PROBE   10 // (mm) Z Clearance for Deploy/Stow
 #define Z_CLEARANCE_BETWEEN_PROBES  5 // (mm) Z Clearance between probe points
@@ -2011,9 +2054,9 @@
         //#define FIL_MOTION8_PULLUP
         //#define FIL_MOTION8_PULLDOWN
       #endif
-    #endif
-  #endif
-#endif
+    #endif // FILAMENT_MOTION_SENSOR
+  #endif // FILAMENT_RUNOUT_DISTANCE_MM
+#endif // FILAMENT_RUNOUT_SENSOR
 
 //===========================================================================
 //=============================== Bed Leveling ==============================
@@ -2296,6 +2339,9 @@
 // Homing speeds (linear=mm/min, rotational=°/min)
 #define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) }
 
+// Edit homing feedrates with M210 and MarlinUI menu items
+//#define EDITABLE_HOMING_FEEDRATE
+
 // Validate that endstops are triggered on homing moves
 #define VALIDATE_HOMING_ENDSTOPS
 
@@ -3237,6 +3283,11 @@
 //
 //#define ANYCUBIC_LCD_VYPER
 
+//
+// Sovol SV-06 Resistive Touch Screen
+//
+//#define SOVOL_SV06_RTS
+
 //
 // 320x240 Nextion 2.8" serial TFT Resistive Touch Screen NX3224T028
 //