Merge https://github.com/MarlinFirmware/Marlin into bugfix-2.1.x-redo

MarlinFirmware · Aug 2, 2024 · 2d30a57 · 2d30a57
2 parents 9b81b2f + 1662e95
commit 2d30a57
Show file tree

Hide file tree

Showing 221 changed files with 3,966 additions and 2,859 deletions.
diff --git a/.github/workflows/ci-build-tests.yml b/.github/workflows/ci-build-tests.yml
@@ -37,11 +37,13 @@ jobs:
     runs-on: ubuntu-latest
 
     strategy:
+      fail-fast: true
       matrix:
         test-platform:
 
         # Native
         - linux_native
+        - simulator_linux_release
 
         # AVR
         - mega2560
@@ -104,9 +106,9 @@ jobs:
 
         # STM32F4
         - ARMED
-        - BIGTREE_BTT002
-        - BIGTREE_GTR_V1_0
-        - BIGTREE_SKR_PRO
+        - BTT_BTT002
+        - BTT_GTR_V1_0
+        - BTT_SKR_PRO
         - FLYF407ZG
         - FYSETC_S6
         - LERDGEK
@@ -181,6 +183,13 @@ jobs:
         pio upgrade --dev
         pio pkg update --global
 
+    - name: Install Simulator dependencies
+      run: |
+        sudo apt-get install build-essential
+        sudo apt-get install libsdl2-dev
+        sudo apt-get install libsdl2-net-dev
+        sudo apt-get install libglm-dev
+
     - name: Run ${{ matrix.test-platform }} Tests
       run: |
         make tests-single-ci TEST_TARGET=${{ matrix.test-platform }}
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -50,7 +50,7 @@
  *
  * Calibration Guides:  https://reprap.org/wiki/Calibration
  *                      https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide
- *                      https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
+ *                      https://web.archive.org/web/20220907014303/sites.google.com/site/repraplogphase/calibration-of-your-reprap
  *                      https://youtu.be/wAL9d7FgInk
  *                      https://teachingtechyt.github.io/calibration.html
  *
@@ -77,7 +77,7 @@
  * Serial port -1 is the USB emulated serial port, if available.
  * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader.
  *
- * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9]
  */
 #define SERIAL_PORT 0
 
@@ -99,19 +99,29 @@
 /**
  * Select a secondary serial port on the board to use for communication with the host.
  * Currently Ethernet (-2) is only supported on Teensy 4.1 boards.
- * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
+ * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9]
  */
 //#define SERIAL_PORT_2 -1
 //#define BAUDRATE_2 250000   // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
 
 /**
  * Select a third serial port on the board to use for communication with the host.
  * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1
- * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9]
  */
 //#define SERIAL_PORT_3 1
 //#define BAUDRATE_3 250000   // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
 
+/**
+ * Select a serial port to communicate with RS485 protocol
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9]
+ */
+//#define RS485_SERIAL_PORT 1
+#ifdef RS485_SERIAL_PORT
+  //#define M485_PROTOCOL 1   // Check your host for protocol compatibility
+  //#define RS485_BUS_BUFFER_SIZE 128
+#endif
+
 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
@@ -1713,6 +1723,8 @@
   #define PROBING_BED_TEMP     50
 #endif
 
+// @section stepper drivers
+
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 0
@@ -1886,6 +1898,8 @@
 #endif
 
 /**
+ * @section filament runout sensors
+ *
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
  *
@@ -2408,9 +2422,9 @@
 #define PREHEAT_2_TEMP_CHAMBER 35
 #define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255
 
-// @section motion
-
 /**
+ * @section nozzle park
+ *
  * Nozzle Park
  *
  * Park the nozzle at the given XYZ position on idle or G27.
@@ -2433,6 +2447,8 @@
 #endif
 
 /**
+ * @section nozzle clean
+ *
  * Clean Nozzle Feature
  *
  * Adds the G12 command to perform a nozzle cleaning process.
@@ -2593,9 +2609,24 @@
   //#include "Configuration_Secure.h"       // External file with PASSWORD_DEFAULT_VALUE
 #endif
 
-//=============================================================================
-//============================= LCD and SD support ============================
-//=============================================================================
+// @section media
+
+/**
+ * SD CARD
+ *
+ * SD Card support is disabled by default. If your controller has an SD slot,
+ * you must uncomment the following option or it won't work.
+ */
+//#define SDSUPPORT
+
+/**
+ * SD CARD: ENABLE CRC
+ *
+ * Use CRC checks and retries on the SD communication.
+ */
+#if ENABLED(SDSUPPORT)
+  //#define SD_CHECK_AND_RETRY
+#endif
 
 // @section interface
 
@@ -2642,21 +2673,6 @@
  */
 #define LCD_INFO_SCREEN_STYLE 0
 
-/**
- * SD CARD
- *
- * SD Card support is disabled by default. If your controller has an SD slot,
- * you must uncomment the following option or it won't work.
- */
-//#define SDSUPPORT
-
-/**
- * SD CARD: ENABLE CRC
- *
- * Use CRC checks and retries on the SD communication.
- */
-//#define SD_CHECK_AND_RETRY
-
 /**
  * LCD Menu Items
  *
@@ -2785,7 +2801,7 @@
 
 //
 // Original RADDS LCD Display+Encoder+SDCardReader
-// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/
+// https://web.archive.org/web/20200719145306/doku.radds.org/dokumentation/lcd-display/
 //
 //#define RADDS_DISPLAY
 
@@ -2851,7 +2867,7 @@
 
 //
 // Elefu RA Board Control Panel
-// https://web.archive.org/web/20140823033947/http://www.elefu.com/index.php?route=product/product&product_id=53
+// https://web.archive.org/web/20140823033947/www.elefu.com/index.php?route=product/product&product_id=53
 //
 //#define RA_CONTROL_PANEL
 
@@ -2983,7 +2999,7 @@
 
 //
 // Cartesio UI
-// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+// https://web.archive.org/web/20180605050442/mauk.cc/webshop/cartesio-shop/electronics/user-interface
 //
 //#define CARTESIO_UI
 

diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
@@ -604,6 +604,8 @@
  */
 //#define FAN_KICKSTART_TIME  100  // (ms)
 //#define FAN_KICKSTART_POWER 180  // 64-255
+//#define FAN_KICKSTART_LINEAR     // Set kickstart time linearly based on the speed, e.g., for 20% (51) it will be FAN_KICKSTART_TIME * 0.2.
+                                   // Useful for quick speed up to low speed. Kickstart power must be set to 255.
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1
@@ -1116,15 +1118,18 @@
 /**
  * Fixed-time-based Motion Control -- EXPERIMENTAL
  * Enable/disable and set parameters with G-code M493.
+ * See ft_types.h for named values used by FTM options.
  */
 //#define FT_MOTION
 #if ENABLED(FT_MOTION)
-  #define FTM_DEFAULT_MODE        ftMotionMode_DISABLED // Default mode of fixed time control. (Enums in ft_types.h)
-  #define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (Enums in ft_types.h)
+  //#define FTM_IS_DEFAULT_MOTION                 // Use FT Motion as the factory default?
+  #define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
+  #define FTM_DEFAULT_SHAPER_X      ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
+  #define FTM_DEFAULT_SHAPER_Y      ftMotionShaper_NONE // Default shaper mode on Y axis
   #define FTM_SHAPING_DEFAULT_X_FREQ   37.0f      // (Hz) Default peak frequency used by input shapers
   #define FTM_SHAPING_DEFAULT_Y_FREQ   37.0f      // (Hz) Default peak frequency used by input shapers
   #define FTM_LINEAR_ADV_DEFAULT_ENA   false      // Default linear advance enable (true) or disable (false)
-  #define FTM_LINEAR_ADV_DEFAULT_K      0.0f      // Default linear advance gain
+  #define FTM_LINEAR_ADV_DEFAULT_K      0         // Default linear advance gain, integer value. (Acceleration-based scaling factor.)
   #define FTM_SHAPING_ZETA_X            0.1f      // Zeta used by input shapers for X axis
   #define FTM_SHAPING_ZETA_Y            0.1f      // Zeta used by input shapers for Y axis
 
@@ -1147,18 +1152,13 @@
   #define FTM_FS                     1000         // (Hz) Frequency for trajectory generation. (Reciprocal of FTM_TS)
   #define FTM_TS                        0.001f    // (s) Time step for trajectory generation. (Reciprocal of FTM_FS)
 
-  // These values may be configured to adjust the duration of loop().
-  #define FTM_STEPS_PER_LOOP           60         // Number of stepper commands to generate each loop()
-  #define FTM_POINTS_PER_LOOP         100         // Number of trajectory points to generate each loop()
-
   #if DISABLED(COREXY)
     #define FTM_STEPPER_FS          20000         // (Hz) Frequency for stepper I/O update
 
     // Use this to adjust the time required to consume the command buffer.
     // Try increasing this value if stepper motion is choppy.
     #define FTM_STEPPERCMD_BUFF_SIZE 3000         // Size of the stepper command buffers
-                                                  // (FTM_STEPS_PER_LOOP * FTM_POINTS_PER_LOOP) is a good start
-                                                  // If you run out of memory, fall back to 3000 and increase progressively
+
   #else
     // CoreXY motion needs a larger buffer size. These values are based on our testing.
     #define FTM_STEPPER_FS          30000
@@ -3443,7 +3443,7 @@
   /**
    * Step on both rising and falling edge signals (as with a square wave).
    */
-  //#define EDGE_STEPPING
+  #define EDGE_STEPPING
 
   /**
    * Enable M122 debugging command for TMC stepper drivers.
@@ -3525,7 +3525,7 @@
   //#define PHOTOGRAPH_PIN 23
 
   // Canon Hack Development Kit
-  // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/
+  // https://web.archive.org/web/20200920094805/captain-slow.dk/2014/03/09/3d-printing-timelapses/
   //#define CHDK_PIN        4
 
   // Optional second move with delay to trigger the camera shutter

diff --git a/Marlin/Version.h b/Marlin/Version.h
@@ -41,7 +41,7 @@
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
-//#define STRING_DISTRIBUTION_DATE "2024-06-27"
+//#define STRING_DISTRIBUTION_DATE "2024-07-30"
 
 /**
  * Defines a generic printer name to be output to the LCD after booting Marlin.

diff --git a/Marlin/src/HAL/AVR/HAL.h b/Marlin/src/HAL/AVR/HAL.h
@@ -159,7 +159,7 @@ typedef Servo hal_servo_t;
 #define GET_PIN_MAP_INDEX(pin) pin
 #define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
 
-#define HAL_SENSITIVE_PINS 0, 1,
+#define HAL_SENSITIVE_PINS 0, 1
 
 #ifdef __AVR_AT90USB1286__
   #define JTAG_DISABLE() do{ MCUCR = 0x80; MCUCR = 0x80; }while(0)

diff --git a/Marlin/src/HAL/AVR/fastio/fastio_AT90USB.h b/Marlin/src/HAL/AVR/fastio/fastio_AT90USB.h
@@ -26,7 +26,7 @@
  *
  *   Logical Pin: 28 29 30 31 32 33 34 35 20 21 22 23 24 25 26 27 10 11 12 13 14 15 16 17 00 01 02 03 04 05 06 07 08 09(46*47)36 37 18 19 38 39 40 41 42 43 44 45
  *   Port:        A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7
- *            The logical pins 46 and 47 are not supported by Teensyduino, but are supported below as E2 and E3
+ *            Logical pins 46-47 aren't supported by Teensyduino, but are supported below as E2 and E3
  */
 
 #include "../fastio.h"