repository.xml.template

<?xml version="1.0"?>
<!--
   Licensed to the Apache Software Foundation (ASF) under one or more
   contributor license agreements.  See the NOTICE file distributed with
   this work for additional information regarding copyright ownership.
   The ASF licenses this file to You under the Apache License, Version 2.0
   (the "License"); you may not use this file except in compliance with
   the License.  You may obtain a copy of the License at

       http://www.apache.org/licenses/LICENSE-2.0

   Unless required by applicable law or agreed to in writing, software
   distributed under the License is distributed on an "AS IS" BASIS,
   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
   See the License for the specific language governing permissions and
   limitations under the License.
-->

<!DOCTYPE Repository
    PUBLIC "-//The Apache Software Foundation//DTD Jackrabbit 2.0//EN"
    "http://jackrabbit.apache.org/dtd/repository-2.0.dtd">

<Repository>
	<!--
    virtual file system where the repository stores global state
    (e.g. registered namespaces, custom node types, etc.).

    ALERT: If you make changes to the Repository XML ensure that you delete
    all files is {solution_folder}/system/jackrabbit/repository and drop all
    the the tables in associated dbs to ensure you start with a pristine
    repository.  If you leave artifacts you may run into errors resulting from
    an "inconsistent" repository!
  -->
	<!--
    Replace the following "FileSystem" XML node to use supported databases as
    the repository file system.  Change the url, user, password and other parameters
    to suit your db installation.  The schemaObjectPrefix should
    be a unique prefix that will be prepended to the table names.
    NOTE: The database must be pre-created in and match the parameters.  See Jackrabbit
    documentation for further explanation.
  -->

	<FileSystem class="org.apache.jackrabbit.core.fs.db.DbFileSystem">
		<param name="driver" value="@@DRIVER@@"/>
		<param name="url" value="@@URL@@"/>
		<param name="user" value="@@USER@@"/>
		<param name="password" value="@@PASSWD@@"/>
		<param name="schema" value="@@DB_TYPE@@"/>
		<param name="schemaObjectPrefix" value="fs_repos_"/>
	</FileSystem>

	<!--
    data store configuration
  -->
	<!--
    Replace the following "DataStore" XML node to use supported databases as the data
    store for the repository.  Change the url, user, password and other parameters
    to suit your db installation.  The schemaObjectPrefix should
    be a unique prefix that will be prepended to the table names.
    NOTE: The database must be pre-created in and match the parameters.  See Jackrabbit
    documentation for further explanation.
  -->

	<DataStore class="org.apache.jackrabbit.core.data.db.DbDataStore">
		<param name="url" value="@@URL@@"/>
		<param name="user" value="@@USER@@"/>
		<param name="password" value="@@PASSWD@@"/>
		<param name="databaseType" value="@@DB_TYPE@@"/>
		<param name="driver" value="@@DRIVER@@"/>
		<param name="minRecordLength" value="1024"/>
		<param name="maxConnections" value="5"/>
		<param name="copyWhenReading" value="true"/>
		<param name="tablePrefix" value=""/>
		<param name="schemaObjectPrefix" value="ds_repos_"/>
	</DataStore>

	<!--
      security configuration
  -->
	<Security appName="Jackrabbit">
		<!--
        security manager:
        class: FQN of class implementing the JackrabbitSecurityManager interface
    -->
		<SecurityManager class="org.apache.jackrabbit.core.DefaultSecurityManager" workspaceName="security">
			<!--
      workspace access:
      class: FQN of class implementing the WorkspaceAccessManager interface
      -->
			<!-- <WorkspaceAccessManager class="..."/> -->
			<!-- <param name="config" value="${rep.home}/security.xml"/> -->
		</SecurityManager>

		<!--
        access manager:
        class: FQN of class implementing the AccessManager interface
    -->
		<AccessManager class="org.apache.jackrabbit.core.security.DefaultAccessManager">
			<!-- <param name="config" value="${rep.home}/access.xml"/> -->
		</AccessManager>

		<LoginModule class="org.pentaho.platform.repository2.unified.jcr.jackrabbit.security.SpringSecurityLoginModule">
			<!--
        anonymous user name ('anonymous' is the default value)
      -->
			<param name="anonymousId" value="anonymous"/>
			<!--
        administrator user id (default value if param is missing is 'admin')
      -->
			<param name="adminId" value="pentahoRepoAdmin"/>

			<param name="principalProvider"
             value="org.pentaho.platform.repository2.unified.jcr.jackrabbit.security.SpringSecurityPrincipalProvider"/>
			<!-- comma separated list of pre-authentication tokens, one per application -->
			<param name="preAuthenticationTokens" value="ZchBOvP8q9FQ"/>
			<!-- must match PentahoSessionCredentialsStrategy.ATTR_PRE_AUTHENTICATION_TOKEN -->
			<param name="trust_credentials_attribute" value="pre_authentication_token"/>
		</LoginModule>
	</Security>

	<!--
      location of workspaces root directory and name of default workspace
  -->
	<Workspaces rootPath="${rep.home}/workspaces" defaultWorkspace="default"/>
	<!--
      workspace configuration template:
      used to create the initial workspace if there's no workspace yet
  -->
	<Workspace name="${wsp.name}">
		<!--
        virtual file system of the workspace:
        class: FQN of class implementing the FileSystem interface
    -->
		<!--
      Replace the following "FileSystem" XML node to use supported databases as
      the repository file system.  Change the url, user, password and other parameters
      to suit your db installation.  The schemaObjectPrefix should
      be a unique prefix that will be prepended to the table names.
      NOTE: The database must be pre-created in and match the parameters.  See Jackrabbit
      documentation for further explanation.
    -->

		<FileSystem class="org.apache.jackrabbit.core.fs.db.DbFileSystem">
			<param name="driver" value="@@DRIVER@@"/>
			<param name="url" value="@@URL@@"/>
			<param name="user" value="@@USER@@"/>
			<param name="password" value="@@PASSWD@@"/>
			<param name="schema" value="@@DB_TYPE@@"/>
			<param name="schemaObjectPrefix" value="fs_ws_"/>
		</FileSystem>

		<!--
        persistence manager of the workspace:
        class: FQN of class implementing the PersistenceManager interface
    -->
		<!--
            Replace the following "PersistenceManager" XML node to use a supported database as the
            persistenanceManager store.  Change the url, user, password and parameters
          to suit your db installation.  The schemaObjectPrefix should
          be a unique prefix that will be prepended to the table names.
          NOTE: The database must be pre-created in and match the parameters.  See Jackrabbit
          documentation for further explanation.
        -->

		<PersistenceManager class="org.apache.jackrabbit.core.persistence.bundle.MySqlPersistenceManager">
			<param name="driver" value="@@DRIVER@@"/>
			<param name="url" value="@@URL@@"/>
			<param name="user" value="@@USER@@" />
			<param name="password" value="@@PASSWD@@" />
			<param name="schema" value="@@DB_TYPE@@"/>
			<param name="schemaObjectPrefix" value="${wsp.name}_pm_ws_"/>
		</PersistenceManager>

		<!--
        Search index and the file system it uses.
        class: FQN of class implementing the QueryHandler interface
    -->
		<SearchIndex class="org.apache.jackrabbit.core.query.lucene.SearchIndex">
			<param name="path" value="${wsp.home}/index"/>
			<param name="supportHighlighting" value="true"/>
		</SearchIndex>


		<WorkspaceSecurity>
			<AccessControlProvider class="org.apache.jackrabbit.core.security.authorization.acl.PentahoACLProvider">
				<!-- Param names have the prefix magicAceDefinition along with a consecutive integer -->
				<!-- Param values have four values separated by colons. -->
				<!-- Param value subitem #1: path possibly including {0} which will be replaced by tenantId -->
				<!-- Param value subitem #2: ABS action name -->
				<!-- Param value subitem #3: comma-separated list of JCR privileges -->
				<!-- Param value subitem #4: boolean where true means that path is a prefix and not to be matched exactly -->
				<param name="magicAceDefinition0" value="{0};org.pentaho.security.administerSecurity;jcr:all;true;true;false" />
				<param name="magicAceDefinition1"
value="{0};org.pentaho.repository.read;jcr:read,jcr:readAccessControl;true;false;true" />
				<param name="magicAceDefinition2"
value="{0}/etc/pdi;org.pentaho.repository.read;jcr:read,jcr:readAccessControl;true;false;false" />
				<param name="magicAceDefinition3"
value="{0}/etc/pdi;org.pentaho.repository.create;jcr:read,jcr:readAccessControl,jcr:write,jcr:modifyAccessControl,jcr:lockManagement,jcr:versionManagement,jcr:nodeTypeManagement;true;false;false" />
				<param name="magicAceDefinition4"
value="{0}/etc;org.pentaho.security.publish;jcr:read,jcr:readAccessControl,jcr:write,jcr:modifyAccessControl,jcr:lockManagement,jcr:versionManagement,jcr:nodeTypeManagement;true;true;false" />
			</AccessControlProvider>
		</WorkspaceSecurity>

	</Workspace>

	<!--
      Configures the versioning
  -->
	<Versioning rootPath="${rep.home}/version">
		<!--
        Configures the filesystem to use for versioning for the respective
        persistence manager
    -->
		<!--
          Replace the following "FileSystem" XML node to use a supported database as
          the repository file system.  Change the url, user, password and other parameters
          to suit your db installation.  The schemaObjectPrefix should
          be a unique prefix that will be prepended to the table names.
          NOTE: The database must be pre-created in and match the parameters.  See Jackrabbit
          documentation for further explanation.
        -->
		<FileSystem class="org.apache.jackrabbit.core.fs.db.DbFileSystem">
			<param name="driver" value="@@DRIVER@@"/>
			<param name="url" value="@@URL@@"/>
			<param name="user" value="@@USER@@"/>
			<param name="password" value="@@PASSWD@@"/>
			<param name="schema" value="@@DB_TYPE@@"/>
			<param name="schemaObjectPrefix" value="fs_ver_"/>
		</FileSystem>

		<!--
        Configures the persistence manager to be used for persisting version state.
        Please note that the current versioning implementation is based on
        a 'normal' persistence manager, but this could change in future
        implementations.
    -->
		<!--
            Replace the following "PersistenceManager" XML node to use a supported database as the
            persistenanceManager store.  Change the url, user, password and parameters
          to suit your db installation.  The schemaObjectPrefix should
          be a unique prefix that will be prepended to the table names.
          NOTE: The database must be pre-created in and match the parameters.  See Jackrabbit
          documentation for further explanation.
        -->
		<PersistenceManager class="org.apache.jackrabbit.core.persistence.bundle.MySqlPersistenceManager">
			<param name="driver" value="@@DRIVER@@"/>
			<param name="url" value="@@URL@@"/>
			<param name="user" value="@@USER@@" />
			<param name="password" value="@@PASSWD@@" />
			<param name="schema" value="@@DB_TYPE@@"/>
			<param name="schemaObjectPrefix" value="pm_ver_"/>
		</PersistenceManager>

	</Versioning>

	<!-- according to https://help.pentaho.com/Documentation/6.1/0P0/100/Jackrabbit_Repository_Performance_Tuning -->
	
	<!--
      Search index for content that is shared repository wide
      (/jcr:system tree, contains mainly versions)

	<SearchIndex class="org.apache.jackrabbit.core.query.lucene.SearchIndex">
		<param name="path" value="${rep.home}/repository/index"/>
		<param name="supportHighlighting" value="true"/>
	</SearchIndex>
	-->

	<!--
      Run with a cluster journal
  -->
	<Cluster id="node1">
		<Journal class="org.apache.jackrabbit.core.journal.MemoryJournal"/>
	</Cluster>
</Repository>