Skip to content

Latest commit

 

History

History
186 lines (125 loc) · 9 KB

loki_operator.md

File metadata and controls

186 lines (125 loc) · 9 KB

Deploying NetObserv with the Loki Operator

This page provides a quick walk-through for setting up the Loki Operator with NetObserv. You can find here more documentation (or there for OpenShift).

The Loki Operator integrates a gateway that implements multi-tenancy & authentication with Loki for logging. However, NetObserv itself is not (yet) multi-tenant.

NetObserv requires to use a specific tenant for Loki, named network, which uses a specific tenant mode implemented in Loki Operator 5.6+. For that reason, NetObserv is not compatible with prior version of the Loki Operator.

Installing Loki Operator

Install the Loki operator using Operator Hub. If using OpenShift, open the Console and navigate to Administrator view -> Operators -> OperatorHub.

Search for loki. You should find Loki Operator in Red Hat catalog.

Install the operator with the default configuration.

Hack script

We provide a hack script that uses AWS S3 storage, to run the steps described below. It assumes you have the AWS CLI installed with credentials configured. It will create a S3 bucket and configure Loki with it.

The first argument is the bucket name, second is the AWS region. Example:

./hack/loki-operator.sh netobserv-loki eu-west-1

If you choose to run it, you can ignore the following steps.

Namespace

For simplicity, this guide assumes Loki is deployed in the same namespace as NetObserv.

If it doesn't already exist, create the netobserv namespace:

kubectl create ns netobserv

External storage

Loki operator requires an external storage, such as Amazon S3. Check the documentation to set it up. Make sure you create the secret in netobserv namespace. Take note of the storage configuration you need to set in LokiStack, as mentioned in the linked documentation.

Example with AWS S3, using aws CLI:

S3_NAME="netobserv-loki"
AWS_REGION="eu-west-1"
AWS_KEY=$(aws configure get aws_access_key_id)
AWS_SECRET=$(aws configure get aws_secret_access_key)

aws s3api create-bucket --bucket $S3_NAME  --region $AWS_REGION --create-bucket-configuration LocationConstraint=$AWS_REGION

kubectl create -n netobserv secret generic lokistack-dev-s3 \
  --from-literal=bucketnames="$S3_NAME" \
  --from-literal=endpoint="https://s3.${AWS_REGION}.amazonaws.com" \
  --from-literal=access_key_id="${AWS_KEY}" \
  --from-literal=access_key_secret="${AWS_SECRET}" \
  --from-literal=region="${AWS_REGION}"

LokiStack

Then create a LokiStack in netobserv namespace. When using OpenShift, navigate to:

Administrator view -> Operators -> Installed Operators -> Loki Operator -> LokiStack -> Create LokiStack

  • Name it loki (any name is fine, but you need to adapt the URLs below accordingly)
  • Choose the size. While not suitable for production, 1x.demo is OK for testing / demo (or 1x.extra-small in operator 5.7). Note that very small clusters (e.g. 3 worker nodes) require 1x.demo, see troubleshooting section below.
  • Set Object Storage -> Secret as noted above.
  • Set Tenants Configuration -> Mode to openshift-network.

This will create gateway, distributor, compactor, ingester, querier and query-frontend components.

NetObserv configuration

Once the Loki stack is up and running, you need to configure NetObserv to communicate to Loki through its gateway service:

  loki:
    mode: LokiStack
    lokiStack:
      name: loki

User access

You then need to define ClusterRoleBindings for allowed users or groups, such as this one for a user named test. This can also be done from the CLI:

oc adm policy add-cluster-role-to-user netobserv-reader test

Cluster admins do not need this role binding.

Testing multi-tenancy

Using the loki-operator 5.7 (or above) + FORWARD mode allows multi-tenancy, meaning that in this mode, user permissions on namespaces are enforced so that users would only see flow logs from/to namespaces that they have access to. You don't need any extra configuration for NetObserv or Loki. Here's a suggestion of steps in order to test it in OpenShift:

  • Install Loki Operator + NetObserv as mentioned above.
  • If you haven't created a project-admin user yet:
    • In ocp console, go to "Users management" > "Users" and click on "Add IDP". For a quick test you can use a "Htpasswd" type
    • E.g. set as content: test:$2y$10$Z2CXWdNCkp6rvoR5bmbI8OyiTYsUreOMn6sV2UNzpl9c1Eb1vBqO. which stands for user test / test.
  • Wait a few seconds or minutes that the IDP is working, then login (e.g. in browser incognito mode - you should see the new htpasswd option from the login screen)
  • Create a new project named "test" from this session. By doing so, the user is a project-admin on that namespace.
  • Deploy some workload in this namespace that will generate some flows (you don't need to do so as the test user - doing so as a cluster admin works as well)
    • E.g. kubectl apply -f https://raw.githubusercontent.com/jotak/demo-mesh-arena/main/quickstart-naked.yml -n test
  • In the admin perspective, a new "Observe" menu should have appeared, with "Network Traffic" as the only page. Go to Network Traffic.
  • You should see an error (403). It's expected: the user needs to have explicit permission to get flows.
    • Apply the role binding: oc adm policy add-cluster-role-to-user netobserv-reader test
  • Refresh the flow logs: you should see traffic, limited to the allowed namespace.

Troubleshooting

  • Logs are by default --log.level=warn. You can set --log.level=debug in gateway.go and opa_openshift.go to get more logs.

  • AWS region not set for deploy-example-secret.sh If aws configure get region returns blank, the shell will fail. You can force region using aws configure --region us-east-1 for example.

  • Insufficient CPU or memory If your pods hang in Pending state, you should double check their status using oc describe We recommand to use size: 1x.extra-small but this still requires a lot of resources. You can decrease them in internal/manifests/internal/sizes.go and set 100m for each CPUs and 256Mi for each Memories

  • Certificate errors in Gateway logs Check ZeroSSL.com CA with acme.sh

  • Running custom Loki query bypassing the gateway:

oc exec -it netobserv-plugin-d894b4544-97tq2 -- curl --cert /var/loki-status-certs-user/tls.crt  --key /var/loki-status-certs-user/tls.key  --cacert /var/loki-status-certs-ca/service-ca.crt -k -H "X-Scope-OrgID: network"  https://loki-query-frontend-http:3100/loki/api/v1/label/DstK8S_Namespace/values

Loki "input size too long" error

This error is generally seen when non cluster-admin users have access to many namespaces. Since the operator gateway will inject namespaces in queries for multi-tenancy, this may result in queries being too long, reaching 5120 characters (which sounds actually like a very reasonable limit for non-cluster-admin users), and thus being rejected by Loki.

For cluster admins

Users identified as cluster admins should not see this error because there is no namespace-based restriction for them. The Loki operator performs this identification by checking if users belong to one of the defined cluster-admin groups.

Note that having the cluster-admin role does not imply belonging to the cluster-admin group. So you should double-check groups.

With OpenShift, to create a cluster-admin group, run:

oc adm groups new cluster-admin

To add a user to cluster-admin group, run:

oc adm groups add-users cluster-admin <username>

You may also want to give cluster-admin role for all group members rather than one by one:

oc adm policy add-cluster-role-to-group cluster-admin cluster-admin

Running these commands should solve the problem. It might be necessary to wait a couple of minutes for changes to be effective.

By default, the Loki operator recognizes three groups as cluster-admins: system:cluster-admins, cluster-admin and dedicated-admin. If you already have a cluster admin group with a different name, you can override this default in the LokiStack configuration:

apiVersion: loki.grafana.com/v1
kind: LokiStack
metadata:
  name: loki
  namespace: netobserv
spec:
  # ... other settings here ...
  tenants:
    mode: openshift-network
    openshift:
      adminGroups: 
      - my-admins-group

For non cluster admins

In most cases, non cluster admins shouldn't see this error as the configured input size limit should be long enough. However, it may still occur than users have access to many namespaces despite not being cluster admins. You may create a new group for these users, and configure the LokiStack tenant as shown above. Beware that in that case, these users have access to all the flows, without namespace restriction.