README.md

dRICH Tutorial Series

Welcome to the dRICH Simulation Tutorials landing page! This page will link to all of our tutorials, and is hosted here on Github to allow for updates as needed. Before going through the dRICH tutorials, there are a few prerequisite tutorials on ePIC software in general:

Prerequisite Tutorials

These are tutorials given to the general ePIC Collaboration. Before following any dRICH-specific tutorials, it is recommended to at least watch the REQUIRED tutorials. The optional prerequisites are not necessary, but are helpful to have done in advance of the corresponding dRICH-specific tutorial (e.g., watch the EICrecon tutorial before dRICH-specific reconstruction tutorial).

1. Setup of eic-shell and Github (REQUIRED): https://indico.bnl.gov/event/16826/
2. DD4hep geometry basics (REQUIRED): https://indico.bnl.gov/event/16828/
3. Simulation with DD4hep (optional): https://indico.bnl.gov/event/16830/
4. Reconstruction with EICrecon (optional): https://indico.bnl.gov/event/16833/

Link to all common ePIC tutorials: https://indico.bnl.gov/category/443/

dRICH Tutorials

These tutorials are organized in weekly sessions, first focusing on running the code with examples, then reading through the corresponding code and providing a tour of the implementation details.

1. Setup and Running Simulations
2. dRICH Visualization, Continuous Integration, Geometry Code
3. Running Reconstruction and Benchmarks
4. Reconstruction and Benchmark Code Part I
5. Reconstruction and Benchmark Code Part II
6. Geometry Parameter Scanning