This repository contains open hardware design files for an adapter board supporting the Allied Vision Alvium CSI-2 camera pinout to NVIDIA's AGX Orin Developer Kit. The board allows the user to interface with two Alvium MIPI CSI-2 compatible cameras over a Flexible Flat Cable (FFC) connector.
This adapter is similar to the Adapter Board for Nvidia Jetson TX2 Xavier Dev Kit, but with a higher connector optimized for the AGX Orin Developer Kit and with minor changes of the default I/O configuration.
AGX Xavier and TX2 Developer Kits are also supported.
You can also purchase the adapter from Allied Vision or from our distributors.
These instructions will get you a copy of the design files to make your own adapter boards for development and testing purposes. The board can be produced and assembled using the provided design files. Please take a look at the mechanical layers for more information regarding the PCB stackup recommended for fabrication.
More information is available on our website:
-
A running installation of Altium.
-
A PCB producer & PCBA manufacturer or some soldering skills.
-
One of the supported embedded boards:
- NVIDIA Jetson AGX Orin Developer Kit
- NVIDIA Jetson AGX Xavier Developer Kit
- NVIDIA Jetson TX2 Developer Kit
-
One or two supported MIPI CSI-2 FPC cables, Allied Vision product codes 18947, 12316, 12317, 12318
Open the CSI2-TX2-XAVIER_Rev02.PrjPcb project file in your Altium environment.
This project is licensed under the MIT License - see the LICENSE file for details