From 535835783114d4b1b1b049a6d6f923e689e12840 Mon Sep 17 00:00:00 2001 From: NachtRaveVL Date: Mon, 1 Aug 2022 11:57:52 -0700 Subject: [PATCH] char fix --- README.md | 2 +- examples/VerticalNFT/VerticalNFT.ino | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index 602cef6..a730f28 100644 --- a/README.md +++ b/README.md @@ -294,7 +294,7 @@ Included below is the default system setup defines of the Vertical NFT example t #define SETUP_PIEZO_BUZZER_PIN 11 // Piezo buzzer pin, else -1 #define SETUP_EEPROM_DEVICE_SIZE I2C_DEVICESIZE_24LC256 // EEPROM bit storage size (use I2C_DEVICESIZE_* defines), else 0 #define SETUP_SD_CARD_CS_PIN SS // SD card CS pin, else -1 -#define SETUP_CTRL_INPUT_PINS {31.33,30,32} // Control input pin ribbon, else {-1} +#define SETUP_CTRL_INPUT_PINS {31,33,30,32} // Control input pin ribbon, else {-1} #define SETUP_EEPROM_I2C_ADDR B000 // EEPROM address #define SETUP_RTC_I2C_ADDR B000 // RTC i2c address (only B000 can be used atm) #define SETUP_LCD_I2C_ADDR B000 // LCD i2c address diff --git a/examples/VerticalNFT/VerticalNFT.ino b/examples/VerticalNFT/VerticalNFT.ino index a7b1272..ccfe354 100644 --- a/examples/VerticalNFT/VerticalNFT.ino +++ b/examples/VerticalNFT/VerticalNFT.ino @@ -9,7 +9,7 @@ #define SETUP_PIEZO_BUZZER_PIN 11 // Piezo buzzer pin, else -1 #define SETUP_EEPROM_DEVICE_SIZE I2C_DEVICESIZE_24LC256 // EEPROM bit storage size (use I2C_DEVICESIZE_* defines), else 0 #define SETUP_SD_CARD_CS_PIN SS // SD card CS pin, else -1 -#define SETUP_CTRL_INPUT_PINS {31.33,30,32} // Control input pin ribbon, else {-1} +#define SETUP_CTRL_INPUT_PINS {31,33,30,32} // Control input pin ribbon, else {-1} #define SETUP_EEPROM_I2C_ADDR B000 // EEPROM address #define SETUP_RTC_I2C_ADDR B000 // RTC i2c address (only B000 can be used atm) #define SETUP_LCD_I2C_ADDR B000 // LCD i2c address