You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
When turned on Linear Pressure Control, the model prints half and the extruder stops
But everything works fine when Linear Pressure Control is not turned on
Bug Timeline
2.0.9
Expected behavior
On Linear Pressure Control and the model is printed
Actual behavior
When turned on Linear Pressure Control, the model prints half and the extruder stops
Steps to Reproduce
(1) Open Linear Pressure Control
(2)Set the value ofLinear Pressure Control to 0.09
Version of Marlin Firmware
2.0.9
Printer model
kingroom kp3
Electronics
No response
LCD/Controller
//320x240, 2.4", FSMC Display From MKS #define MKS_ROBIN_TFT24
Other add-ons
No response
Bed Leveling
MBL Manual Bed Leveling
Your Slicer
Prusa Slicer
Host Software
None
Don't forget to include
A ZIP file containing your Configuration.h and Configuration_adv.h.
Did you test the latest
bugfix-2.1.x
code?Yes, and the problem still exists.
Bug Description
When turned on Linear Pressure Control, the model prints half and the extruder stops
But everything works fine when Linear Pressure Control is not turned on
Bug Timeline
2.0.9
Expected behavior
On Linear Pressure Control and the model is printed
Actual behavior
When turned on Linear Pressure Control, the model prints half and the extruder stops
Steps to Reproduce
(1) Open Linear Pressure Control
(2)Set the value ofLinear Pressure Control to 0.09
Version of Marlin Firmware
2.0.9
Printer model
kingroom kp3
Electronics
No response
LCD/Controller
//320x240, 2.4", FSMC Display From MKS #define MKS_ROBIN_TFT24
Other add-ons
No response
Bed Leveling
MBL Manual Bed Leveling
Your Slicer
Prusa Slicer
Host Software
None
Don't forget to include
Configuration.h
andConfiguration_adv.h
.Additional information & file uploads
新建压缩(zipped)文件夹.zip
The text was updated successfully, but these errors were encountered: