Skip to content

Latest commit

 

History

History
252 lines (157 loc) · 6.69 KB

Changelog.md

File metadata and controls

252 lines (157 loc) · 6.69 KB
Raw

Version 2.5.1

outer_limits

  • Treat the behavior near zero with special care. This means that input files now need to specify epsilon_value in addition to infinity_value.

  • Added the --meshThreshold option to customize how finely the mesh is divided when searching for negative regions.

  • Added the --useSVD option to control whether to regularize the problem with an SVD.

  • Added the sdp2functions and pvm2functions programs to convert JSON and XML input files to the format that outer_limits expects.

  • Fix an uninitialized matrix bug.

  • Increase the maximum number of allowed SVD iterations because we are working at high precision.

spectrum

  • Initial release.

Version 2.5.0

sdp2input & pvm2sdp

  • Uses a new, INCOMPATIBLE JSON-based format for writing output. The output is written as a single zip file, with entries that are each zip files. This reduces problems with running out of inodes on some filesystems. The zip format also transparently catches file corruption. The format is documented in SDPB_input_format.md.

  • Mathematica polynomial input can now handle a plain 'x' as a polynomial term, rather than requiring '1.0*x'.

sdp2input

  • Fixed a bug causing incorrect results when poles are closer together than 1e-2.

  • Significantly reduced memory use when using multiple cores

sdpb

  • Uses the new incompatible json-based format from pvm2sdp and sdp2input.

  • Can read input as a directory or a wide variety of archive formats (e.g. zip, tar, 7z). This requires a new dependency on the libarchive library.

  • Added the options --minPrimalStep and --minDualStep as stopping conditions.

  • Clean up output by only printing the Block Grid Mapping when verbosity=2.

outer_limits

  • Initial release.

approx_objective

  • Initial release.

Version 2.4.0

sdpb

  • Made checkpointing more robust. This required a modification to the checkpoint format. Old checkpoints can still be read in, but new checkpoints will be written out in the new format. Old checkpoints will not be automatically deleted.

  • Better handle errors when reading blocks. SDPB now gives informative error messages instead of inscrutable MPI crash reports.

sdp2input

  • Added support for JSON input and removed support for XML input. Mathematica input is still supported. As a result, RapidJSON is now a build requirement.

Version 2.3.1

sdpb

  • Fixed a race condition when performing a timing run that caused incorrect answers.

  • Fixed leaks of MPI communicators SDPB and Elemental that caused crashes when running long jobs with Intel's MPI.

sdp2input

  • Fixed a corner case when reading Mathematica files that do not have precision markers.

Version 2.3.0

sdpb

  • Replaced the option --writeMatrices with a more general option --writeSolution. This enables fine grained control over which output files to write.

  • Changed the default for --maxRuntime to effectively infinite (2^63 seconds)

  • Use matrix size as a heuristic when allocating cores for a timing run. This significantly decreases memory used during the timing run, making it more comparable to the regular solver run.

  • Write fewer files when there are constant constraints.

  • Fix a corner case when running a small problem on many cores

pvm2sdp

  • Implemented a better check for bad elements when reading in data. This also happened to speed it up by about 15%.

  • No longer needlessly promote constant constraints to linear constraints.

Version 2.2.0

sdpb

  • Fixed some race conditions when writing files and running on large numbers of cores.

  • Added a number of checks for errors when reading and writing files. This required modifying the text checkpoints format to include a newline at the end, so text checkpoint written with older versions of SDPB will not load with this new version. Binary checkpoints are unaffected and will continue to work.

  • Require a valid checkpoint if the initialCheckpointDir option is set.

Version 2.1.3

sdpb

  • Fixed a bug in load balancing that caused jobs to crash on some machines.

  • Made some very, very small problems run faster.

pvm2sdp

  • Added the ability to read lists of input files from a file.

sdp2input

  • Added the ability to read lists of input files from a file.

  • Significantly reduced memory use for runs with many cores.

Version 2.1.2

sdpb

  • Significantly reduced memory use for large runs with many cores.

Version 2.1.1

sdpb

  • Fixed a bug that was erroneously rejecting options in parameter files.

Version 2.1.0

sdpb

  • Fixed the final solution output of the x vector, and enabled plain text output of the X and Y diagonal block matrices with the new --writeMatrices option. This required splitting up these vectors and matrices into separate files. So the option outFile has been changed to outDir, and all of the plain text solution files go into outDir.

  • Added the ability to restart from plain text output generated with --writeMatrices. This is useful if restarting using different precision or a different number of cores. Due to limitations in GMP, a few bits of precision are lost during the translation to and from plain text. So a run restarted from plain text will not be bitwise identical.

  • Reorganized the options.

Version 2.0.4

sdpb

  • Significantly reduced memory usage for large parallel jobs. In addition to ordinary improvements in memory use, there is a new option: procGranularity. This option can further reduce memory use at the cost of slower performance.

  • Reordered how stopping conditions are checked. The most visible change is that SDPB now checks for primal solutions before primal jumps. This also fixes a bug where SDPB would hang with the option --findPrimalFeasible.

  • Changed the logic for how output and checkpoint directory names are generated. Instead of replacing any extension on sdpDir, sdpb now unconditionally adds ".out" or ".ck". This prevents problems when, for example, there is a decimal number in sdpDir.

  • Added a --version option.

pvm2sdp

  • Significantly reduced memory usage.

sdp2input

  • Fixed a corner case that was rejecting valid polynomials.

Version 2.0.3

sdpb

  • Fix computation of the primal error

Version 2.0.2

sdpb

  • Fix a bug that was erroneously writing checkpoints during timing runs

sdp2input

  • Fix a bug when computing normalization
  • Handle parsing of constant polynomials in Mathematica input
  • Handle DampedRational's that are just a constant

Version 2.0.1

sdpb

  • Include training time in maxRunttime
  • Fix a corner case in boost autodetection

Version 2.0.0

  • Initial release.