diff --git a/docs/SUMMARY.md b/docs/SUMMARY.md
index 4cb3078..9c98ccf 100644
--- a/docs/SUMMARY.md
+++ b/docs/SUMMARY.md
@@ -10,6 +10,7 @@
   * [Download and Setup (Software)](installation/download-and-setup-software.md)
   * [Connecting with RelayKeys](installation/connecting-with-relaykeys/README.md)
     * [Wired Mode](installation/connecting-with-relaykeys/wired-mode.md)
+    * [Wired + Recieving Dongle](installation/connecting-with-relaykeys/wired-+-recieving-dongle.md)
     * [Wireless Mode](installation/connecting-with-relaykeys/wireless-mode.md)
   * [Checking it works](installation/checking-it-works.md)
 * [🖥 Using RelayKeys](using-relaykeys/README.md)
diff --git a/docs/installation/connecting-with-relaykeys/wired-+-recieving-dongle.md b/docs/installation/connecting-with-relaykeys/wired-+-recieving-dongle.md
new file mode 100644
index 0000000..f4ce9e8
--- /dev/null
+++ b/docs/installation/connecting-with-relaykeys/wired-+-recieving-dongle.md
@@ -0,0 +1,9 @@
+# Wired + Recieving Dongle
+
+Plug in your receiving dongle to a device. Your device will see this as a keyboard attached. \
+\
+If you are asked to press some keys for the device to understand it, just close this window for now. 
+
+On the sending side, it will pair by default with the receiver. You don't need to do a thing. \
+\
+However, if you have gone and paired with any other devices, you may find this not work. You will need to remove any paired devices and try again. 
diff --git a/docs/installation/connecting-with-relaykeys/wireless-mode.md b/docs/installation/connecting-with-relaykeys/wireless-mode.md
index 9d9f15e..72c59be 100644
--- a/docs/installation/connecting-with-relaykeys/wireless-mode.md
+++ b/docs/installation/connecting-with-relaykeys/wireless-mode.md
@@ -1,5 +1,11 @@
 # Wireless Mode
 
+
+
+{% hint style="warning" %}
+Warning: This mode definitley is slightly more laggy and can be fiddly to setup. 
+{% endhint %}
+
 Note that this mode is useful on devices where you can't plug anything into your device. The setup can feel _strange -_ what we need to do is tell your relaykeys hardware the device to connect to.
 
 1. Plug in device and follow instructions [as above](wireless-mode.md#plug-in-your-relaykeys-stick-and-pair-with-a-computer-wired-mode)